o_dd Posted October 8, 2023 Report Share Posted October 8, 2023 What are the CAN settings? I changed from G4+ to G4X I am using AEM CD7 for display. The lambda trim that was displayed correctly on the G4+ is now showing abnormal values. Are the settings different on the G4X? If it is normal, the value is displayed in the range from -15 to +15. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 8, 2023 Report Share Posted October 8, 2023 We cant see how you have it set up from your picture, but I suspect you have it scaled wrong. G4+ had hard-coded multipliers and offsets on many parameters, whereas G4X transmits at 1:1 unless specified. For CL Lambda fuel correction G4+ was using a multiplier of 10 and an offset of 1000, so entering these in G4X should make the output the same. Quote Link to comment Share on other sites More sharing options...
o_dd Posted October 9, 2023 Author Report Share Posted October 9, 2023 It worked fine. Thank you very much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.