Trigger Wheel

[Javier Sanchez]

Hi,

I want to remove the OEM Crank Angle Sensor of my CA18DET (It is fitted on exhaust camshaft) and fit a trigger wheel on the crank.

So, can I just put the wheel on the crank and remove the CAS, or will i need another sensor on the camshaft?

Thank you

[Simon]

Depends on if you want to run sequential fuel and individual coils.

For either you will need a sync off the cam as well.

[Javier Sanchez]

I want secuencial fuel and individual coils, so, Will i have to add another wheel in the camshaft, is correct?

Thanks

[Simon]

You will need a single tooth on the cam.