jsbsti Posted November 5, 2023 Report Share Posted November 5, 2023 Hello, I am going to install a lamdda link can on subaru ej 207, but my vehicle has an exhaust pressure sensor on the exhaust manifold and my lambda sensor is on down pipe. My question is will lambda link take into account the pressure and make a compensation? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted November 5, 2023 Report Share Posted November 5, 2023 If the exhaust pressure sensor is setup using the exhaust pressure input and you are using the built in CAN Lambda stream then yes that exhaust pressure will affect the value coming back from the sensor. Best way to solve this in your application would be to use two custom CAN streams instead of the built in CAN Lambda CAN mode and send BAP instead of exhaust pressure. The Link CAN Lambda CAN info is all specified in the help manual and there are some Link CAN Lambda .lcs (Custom CAN stream) files included in your PCLink install. jsbsti 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.