kyle mcguire Posted February 8, 2015 Report Share Posted February 8, 2015 hi ive recalibrated my tps but when i try rev the engine it disconnects from pc link and misfires like its got rev cut but when i disconnect tps engine revs fine no miss and doesnt disconnect from pc link please help previously car was was using a different tps and inlet manifold Quote Link to comment Share on other sites More sharing options...
Scott Posted February 10, 2015 Report Share Posted February 10, 2015 Hi Kyle, I think you may have emailed me about this also. Have you done a TPS Calibration? This is under Options > TPS Setup. Scott Quote Link to comment Share on other sites More sharing options...
kyle mcguire Posted February 12, 2015 Author Report Share Posted February 12, 2015 hi scott yeah ive calibrated the tps i sent u a log file i also noticed my battery voltage is only reading 10v on pc link but when i check voltage with a multimeter it says 14v any ideas how i could be losing power between the ecu cheers kyle Quote Link to comment Share on other sites More sharing options...
Scott Posted February 13, 2015 Report Share Posted February 13, 2015 Hi Kyle, The battery voltage in your log looks very low and spikey. Possibly you have a bad ground or +12V feed to the ECU. The following pins should have a good ground to them: Pin 108 and pin 116. The following pins should have +12V with the Key on: Pin 45 and pin 49 Â You can find the pin numbering in PCLink help under PCLink Help > G4 Plug-IN ECU Installation Manual > Pinout > GTRLink. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.