Floppyz Posted December 15, 2023 Report Share Posted December 15, 2023 Hallo everybody, i've got error 77 on my new evo8 g4x tuneing, but I can't undertand why! My pedal have 2 ouput signals where 'sub' is 50% of 'main'. Signals looks good, but why APS error accumulator grows in this way? Is this driven by difference grater tha 6% between main and sub voltage or scaled percentage? and after that reach faulty delay and stops: Where I am in wrong? bye Filippo Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 16, 2023 Report Share Posted December 16, 2023 Your screenshot shows the APS sub covers the full range of pedal movement so the APS (Sub) 100% setting should be set to 100% for this pedal. You would only set it to 50% if you had a pedal where the APS sub output only varied voltage for the first 50% of pedal movement and becomes static above that. Quote Link to comment Share on other sites More sharing options...
Floppyz Posted December 16, 2023 Author Report Share Posted December 16, 2023 Hi Adam, nice to read you again. Yes you are in right but that is the reason why accumulator rise in that way? even if signals are coherent? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 16, 2023 Report Share Posted December 16, 2023 Yes, you have told the ecu that the APS sub should read 100% when the main is at 50%, but the signal it is receiving does not reflect that. If the signal does not match the expected signal then the error accumulator will continue to increment until the signal is corrected. Quote Link to comment Share on other sites More sharing options...
Floppyz Posted December 18, 2023 Author Report Share Posted December 18, 2023 Ok Adam, now DBW it's ok. tks. bye Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.