AEWON Posted January 10 Report Share Posted January 10 Good morning. I have attached my Link Map and Motec config file. I would like to send the Motec GPS ground speed Data displayed on the Motec C125 dash back to the Link G4+ ecu via CAN and then send the data/signal to control the factory Nissan electronic speedo. I cannot use the factory Vehicle speed sensor due to a gear box conversion. I am hoping this is possible? Thanks in advance. LINK G4+_MOTECC125.c125v64 Nissan S14 - latest map 2024.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 10 Report Share Posted January 10 Try these. The ECU should receive Motec GPS speed as "RR Wheel Speed". Nissan S14 - latest map 2024 Receive RR wheel spd.pclr LINK G4+_MOTECC125 send GPS.c125v64 Quote Link to comment Share on other sites More sharing options...
AEWON Posted January 11 Author Report Share Posted January 11 Thanks! I’ll give it a crack this weekend. Cheers! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.