obxtsi Posted January 16 Report Share Posted January 16 Looking to see what is my best option for installing a wideband. I have an scg-1 boost controller with wideband already. I also have an aem x series wideband I could install or should I use some link wideband setup? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 16 Report Share Posted January 16 The innovate wideband controllers are POS so avoid that like the plague. The X-series generally work ok, I suggest you connect the "AEMNet" wires to the Link CAN H/L to get the more accurate CAN data. Quote Link to comment Share on other sites More sharing options...
obxtsi Posted January 17 Author Report Share Posted January 17 Is this the connector I should buy? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 17 Report Share Posted January 17 What specific ecu do you have? Quote Link to comment Share on other sites More sharing options...
obxtsi Posted January 17 Author Report Share Posted January 17 1g dsm pnp vr4 Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 18 Report Share Posted January 18 Then yes, the CAN JST would be suitable for making a CAN connection to the ECU. You will still have to connect the black/red wire tails to your own power source, and you will have to make the connection between the 4pin DTM on the CANJST and the AEM device. Quote Link to comment Share on other sites More sharing options...
obxtsi Posted January 21 Author Report Share Posted January 21 Am I able to use the can bus connector and the expansion cable simultaneously? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 22 Report Share Posted January 22 Yes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.