Jump to content

Cruise control setup


Recommended Posts

I can't seem to get cruise control to become active, logs show cruise on going inactive when set switch is active...

Does both the brake NO and NC inputs need to be assigned ?, car only has NO brake switch which is connected and working, no cruise cancel input is setup as having a brake switch should work !?

logfile ; https://drive.google.com/file/d/1Nktsc0Vd60oUM5HgedE8LJ3mKpfPf5wZ/view?usp=sharing

tune; https://drive.google.com/file/d/1L3r7nt5Enbb8pzat-zeKRrsGS1SGorqa/view?usp=sharing

Link to comment
Share on other sites

I had the buttons setup with resistor network and the set button is NC, so it sent the voltage the other way when pushed, maybe the analog button definition/steps doesn't like that !

Now I have the DSS software control over the pullup resistors on the DI's I re-pinned it all to digital setup, and inverted the CAN message logic for the SET button, cruise now works fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...