oversteer Posted January 21 Report Share Posted January 21 I can't seem to get cruise control to become active, logs show cruise on going inactive when set switch is active... Does both the brake NO and NC inputs need to be assigned ?, car only has NO brake switch which is connected and working, no cruise cancel input is setup as having a brake switch should work !? logfile ; https://drive.google.com/file/d/1Nktsc0Vd60oUM5HgedE8LJ3mKpfPf5wZ/view?usp=sharing tune; https://drive.google.com/file/d/1L3r7nt5Enbb8pzat-zeKRrsGS1SGorqa/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 21 Report Share Posted January 21 It looks like you have a wiring issue, most of the time that you push the set switch it interrupts the cruise on switch signal. Quote Link to comment Share on other sites More sharing options...
oversteer Posted January 23 Author Report Share Posted January 23 I had the buttons setup with resistor network and the set button is NC, so it sent the voltage the other way when pushed, maybe the analog button definition/steps doesn't like that ! Now I have the DSS software control over the pullup resistors on the DI's I re-pinned it all to digital setup, and inverted the CAN message logic for the SET button, cruise now works fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.