ancientwonde Posted February 1 Report Share Posted February 1 I am having issues with first startup. Injectors are firing but no spark from the coils. The coils work during test mode but when cranking I see 0 dwell and don't get any spark. Setup is USDM EJ205, IGN1A's, ID1050x It doesn't seem to like the trigger settings, and gets stuck in a Test Gap/Verify Gap loop. originally I assumed that my timing belt is off but I double checked it and it seems perfect. Is there anything obvious I'm missing? Trigger Scope - 2024-02-1 2;57;55 am.llgx gc8 v2.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 1 Report Share Posted February 1 Both the crank sensor and cam sensor (front) are wired with the incorrect polarity, and you are using the wrong trigger mode. Swap the +/- wires at the sensor plugs and change the trigger mode to "Subaru V7-10(JDM)" and you should be closer to something that will work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.