Hartsock_Motorsports Posted February 13 Report Share Posted February 13 Howdy, What does the JZX100 chassis need from the ECU and or engine to make the air conditioning function correctly? I see the JZX100 pnp uses can2 for AC and factory temp gauge to be happy. I have an aftermarket display so the factory temp gauge is no longer in use. How do I wire up one of my bus's to make the AC computer function correctly? No matter what I have tried the ac switch doesn't send any kind of signal out to the Fury ecu. I can manually activate the AC comp from the aux test function. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 13 Report Share Posted February 13 It is effectively a slow PWM coded temperature signal. Connect the THWO wire to an aux output 1-10 and try the setup below. Quote Link to comment Share on other sites More sharing options...
Hartsock_Motorsports Posted February 13 Author Report Share Posted February 13 I will try this today. Thank you, Adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.