Rx2jz Posted February 18 Report Share Posted February 18 hi Been using CLL on a mates g4x ecu with great success. Now having finally got my car running with the g4+ Fury i cant seem to get the Auto Wideband CLL working. Only managed to get the CLL Stoich option working which doesnt seem to be keeping up with the corrections needed ( wondering if this is just because its an older ECU ) Tune attached if anyone is willing to look over my CLL setup and why the Auto wideband doesnt seem to work. May have to upgrade Cheers CLL with 36-2 and EGTs USE TO STARTUP.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 18 Report Share Posted February 18 Look at the CLL status runtime. I would say most it is most likely TPS and MAP delta locked out as you have those set to zero. Quote Link to comment Share on other sites More sharing options...
Rx2jz Posted February 19 Author Report Share Posted February 19 Thanks Adam What do you suggest we set them to ? I just wanna see it working once car has warmed up to confirm this ecu is all ok . cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 19 Report Share Posted February 19 You have runtimes for TPS delta and MAP delta, watch them live with the engine running/driving and set your lockouts to something appropriately above that so CLL doesnt disable at the smallest change in load. Rx2jz 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.