kris lee Posted July 22, 2012 Report Share Posted July 22, 2012 i have just built a corolla 3sgte i am using a link g3 in it, i also have a 3sgte mr2 which i have link g4 in, is there anyway i could load the map from my g4 into my g3 to get the car running? also my g4 has four injection drives but g3 only has two where do i pin the injector three and four on the ecu plug? thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted July 23, 2012 Report Share Posted July 23, 2012 Injectors will need to be paired up. So two injectors per drive. Most of the numbers can be manually copied across. You just need to configure the tables to match. Quote Link to comment Share on other sites More sharing options...
kris lee Posted July 24, 2012 Author Report Share Posted July 24, 2012 ok kool and do i have injector 1 and 2 in one drive 3 and 4 in other, or do i do 1 and 3 and 2 and 4? thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted July 25, 2012 Report Share Posted July 25, 2012 Pair 1 and 3 on drive 1 and do 2 and 4 off drive 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.