TomMcManaway Posted March 9, 2024 Report Posted March 9, 2024 Hey guys, I've recently tuned a boat with a 2ZRFE and an old link G4 (Storm from memory) but could not get the VVTi working I managed to send some duty to the solenoid to confirm that was working but not sure the actual cam trigger pattern is supported. I have attached a photo of the cam. Does anyone know if any of the other Toyota VVTi control modes will work? The teeth are approx 10mm, 24mm and 37mm long Quote
Adamw Posted March 17, 2024 Report Posted March 17, 2024 The rising edges are evenly spaced so you can use the "3 evenly spaced teeth" vvt mode. What is it using for trigger mode? Quote
TomMcManaway Posted March 17, 2024 Author Report Posted March 17, 2024 Thanks Adam Trigger is set to multitooth / missing Quote
Adamw Posted March 18, 2024 Report Posted March 18, 2024 So does it have a separate single cam tooth for trigger 2 sync? Or are you using cam level sync mode or something? Quote
TomMcManaway Posted March 19, 2024 Author Report Posted March 19, 2024 Using the same sensor for trigger 2 sync from memory & currently set to cam level, is this likely to be an issue once the cam is advanced? Quote
Adamw Posted March 19, 2024 Report Posted March 19, 2024 Based on a 2ZR VVT scope I found online it looks like cam level sync would allow full cam movement. The only doubt is I dont know if the cam was at home position or advanced when this scope was captured. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.