TomMcManaway Posted March 9 Report Share Posted March 9 Hey guys, I've recently tuned a boat with a 2ZRFE and an old link G4 (Storm from memory) but could not get the VVTi working I managed to send some duty to the solenoid to confirm that was working but not sure the actual cam trigger pattern is supported. I have attached a photo of the cam. Does anyone know if any of the other Toyota VVTi control modes will work? The teeth are approx 10mm, 24mm and 37mm long Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 17 Report Share Posted March 17 The rising edges are evenly spaced so you can use the "3 evenly spaced teeth" vvt mode. What is it using for trigger mode? Quote Link to comment Share on other sites More sharing options...
TomMcManaway Posted March 17 Author Report Share Posted March 17 Thanks Adam Trigger is set to multitooth / missing Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 18 Report Share Posted March 18 So does it have a separate single cam tooth for trigger 2 sync? Or are you using cam level sync mode or something? Quote Link to comment Share on other sites More sharing options...
TomMcManaway Posted March 19 Author Report Share Posted March 19 Using the same sensor for trigger 2 sync from memory & currently set to cam level, is this likely to be an issue once the cam is advanced? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 19 Report Share Posted March 19 Based on a 2ZR VVT scope I found online it looks like cam level sync would allow full cam movement. The only doubt is I dont know if the cam was at home position or advanced when this scope was captured. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.