Sorenjensen Posted May 19, 2014 Report Share Posted May 19, 2014 Hello I have set your air / fuel watch over my ecu box, red wire pin 49 black wire pin 50 white wire pin 29, and will then run quick tune, but it gets no signal, what have I forgotten to do, or I mounted the white wire wrong. euc is link 4g plug in for nissan skyline r34 gtr. Regards søren denmark. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 21, 2014 Report Share Posted May 21, 2014 You will need to check you have selected Wideband as the input for AN Volt 6 and also have the correct calibration for the AEM output. Check you are seeing a change in voltage at the pin 29 as the fuelling is changed. Quote Link to comment Share on other sites More sharing options...
Sorenjensen Posted May 21, 2014 Author Report Share Posted May 21, 2014 ok thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.