Overrun fuel cut and Anti-lag

[Stephen Fargher]

just curious - does the Overrun fuel cut mode 'interfere' or get involved in any way if you have anti-lag configured and running?  Give that AL wants to inject fuel and retard timing and the overrun cut wants to cut fuel and retard timing!! I'm assuming the answer is no of course!!!

Also, what is the default boost map like (i.e. how much lbs boost max) for EvoLink G3?

thanks.

[Simon]

If running Anti-Lag best bet is to turn the over run cut off.

For the boost map only time will tell. Work in slowly and see if the numbers will need moving up or down.

[Simon]

Having it select based on anti lag configuration is a good idea which I can pass on to engineering.

[Simon]

When is really an unknown. If it does become an option at all.