curly Posted March 25, 2024 Report Posted March 25, 2024 Not really a G4x, but I am looking for data on a Link product! Looking specifically for the Link NTC1-8 sensor data. I'm using one of these on a AIM PDM setup, which uses a 2k ohm pull-up vs. Link's 1k. Can't seem to find anything in the help data, but maybe I'm missing it. I could put it in ice water and record values as it warms to a boil, but it'd be a bit easier to just calculate with this data. Thanks in advance! Quote
Vaughan Posted March 25, 2024 Report Posted March 25, 2024 It is the same calibration as the Delphi AC IAT Quote
curly Posted March 29, 2024 Author Report Posted March 29, 2024 Thank you, this worked perfect. Someone on another forum whipped up the attached calculator, and I was able to get a perfect calibration for AIM's 2k pullup resistor. https://willwaldron.com/voltage_divider_calculator/sensorvoltage.html Vaughan 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.