Jump to content

Recommended Posts

Posted

Hi, 

I just installed it and test it   I spark and injectors are working    also have rpm 

But when I crank nothing is working

 

Need help

 

Posted

For the trigger scope, you need to click the capture button when the engine is cranking, not before.  

What engine is it?  Have you set the base timing?

Posted

You cant use "cam pulse 1X" sync mode because your cam has 3 teeth on it.  2NZ trigger mode should work.  You will need to set base timing.  

You will need to assign a TPS sensor, your coolant temp sensor is not working, and you will need a wideband lambda to tune it.    

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...