Floppyz Posted April 20 Report Share Posted April 20 Hallo everybody, dose someone alredy used ADU dashboard with link ECU? I'm tuneing an evo9 for hillclimb challenge that alredy have this ADU dash on. I've tested to set as generic Dash and other type too, but do not display enythings: I think CAN line is ok because during the "test device" opartions some value are display, as gear 8, 7.4V battery and some rpm value... can someone suggest me how to set it properly? tks bye Quote Link to comment Share on other sites More sharing options...
Floppyz Posted April 20 Author Report Share Posted April 20 Ok, find ID is 1536 in decimal, but frames are different... Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 21 Report Share Posted April 21 Attach your ADU file and I will take a look. Their default Link template looks correct to me, it uses ID1000 like you have set above. I have attached a basic ADU file with the CAN set up that should work. Link Generic Dash.adu Quote Link to comment Share on other sites More sharing options...
Floppyz Posted April 24 Author Report Share Posted April 24 Yes Adam, finally I get the same solution importing "Link Genric Dash" file in ADU. It works , still have some value to link correctly but i'll check better in these days. tks bye Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.