PhoSho Posted April 21 Report Share Posted April 21 My CLL ECT Lockout is currently set to 80c. I just switched over from traditional to modelled, so I have zero'd the warmup enrichment table and have instead used lambda overlay to enrich during warmup. My question is: does CLL account for the overlay table values? And if so, is there any reason not to lower my ECT Lockout to something like 40c? I would like to get into CLL earlier. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 21 Report Share Posted April 21 4 minutes ago, PhoSho said: My question is: does CLL account for the overlay table values? And if so, is there any reason not to lower my ECT Lockout to something like 40c? I would like to get into CLL earlier. CLL uses the Lambda Target value which is affected by what is in the Lambda overlay and so the Lambda overlay table will affect what CLL does. Quote Link to comment Share on other sites More sharing options...
PhoSho Posted May 11 Author Report Share Posted May 11 Thank you Vaughan - I suspected that was the way it worked. In modelled mode with warmup enrichment disabled (zero'd), is there any reason to not have CLL kick in a lower coolant temps? I have my overlay table set to enrichen at colder ECTs and if CLL obeys this adjustment, is there any downside to having CLL enabled earlier? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 11 Report Share Posted May 11 It is fine to do that. PhoSho 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.