Siward Posted April 27 Report Share Posted April 27 Hi All, I have a G4x Evo ecu and I am wiring up 2 x combined link temp/pressure sensors for use with fuel and oil. I am using the expansion loom as in pic, I was going to share sensor ground and +5v, use V6 and V7 for each sensor pressure, V9 and V10 with a 1k pull up resistor between +5v for each temp signal. Is this correct ? Thank you Simon Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28 Report Share Posted April 28 Yes that is correct. Siward 1 Quote Link to comment Share on other sites More sharing options...
Siward Posted April 28 Author Report Share Posted April 28 Thank You, I have attached a Diagram that may help others Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.