aaron daunt Posted November 23, 2013 Report Share Posted November 23, 2013 hi so I have wired a linkplus g1 v10 into the rb25det and not getting an ign signal out of the ecu, I do have injector pulse , good signal from both triggers (used an oscilloscope) power and ground at coils, rpm counter seems to be working when connected to the pclink ,  it has a rough map that should get it running,  any help would be greatly appreciated thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted November 28, 2013 Report Share Posted November 28, 2013 In the ECU there will be a sub-board with 1 or 2 rotary switches. One switch will be close to an LED. This switch should be set to B, the other switch if fitted should be set to 0. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.