evo_gerard Posted July 4 Report Share Posted July 4 good day everyone, got a quick question here. I'm checking out 3rd gen rx7 for a friend of mine. he just bought it and it has a g4 plug-in ecu (mazda rx7 s7 PCB V1.2) the expansion plug on the ecu show the following label: Gnd +5v DI8 DI7 AnVolt5 AnVolt6 AnVolt7 AnTemp3 but in the G4 software I'm not seeing AnVolt 7 nor DI7 or DI8 is there something i have to activate to see those extra channels? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 4 Report Share Posted July 4 Assuming you are looking at the map from the actual ecu/online and not just the S7 base map that comes in the software then what you see in the software is what you have. The extra inputs on the adapter board were only available on the more expensive Vipec version, the G4 was the lower cost stripped down hardware and less software features at the time. There was a later "G4 Pro" board that had the extra inputs which is why I say you need to be looking at the actual map from the ecu. evo_gerard 1 Quote Link to comment Share on other sites More sharing options...
evo_gerard Posted July 4 Author Report Share Posted July 4 thanks @Adamw I'll double check that later today. when i downloaded the map i didn't notice it. but its a g4 board v1.2. I opened it to confirm that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.