Gotty101 Posted July 6 Report Share Posted July 6 Hi, so i managed to get my Zetec turbo engine idling nicely in modeled mode. The problem is my tuner has no experience in mapping in modeled, so i need to change my map to traditional which is a real shame. What would the best way be to do this change from Modeled to Traditional. Could i use the injector pw from a log to help build the values? Many thanks PC Datalog - 2024-06-7 2;47;18 pm.llgx Zetec Turbo.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 6 Report Share Posted July 6 The fuel map will likely end up a different shape in some areas but I suspect it will likely run pretty well with not much changes at all. Change mode to traditional make sure open loop correction is enabled, turn off charge temp correction, start with th e master fuel at about 15-20ms then just adjust it up or down until it runs similar to before. Quote Link to comment Share on other sites More sharing options...
Gotty101 Posted July 7 Author Report Share Posted July 7 Hi Adam, thank you loads for the info. I will give that a go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.