Oskar Mejving Posted May 30, 2013 Report Share Posted May 30, 2013 Hello. I got a G4 plug in to rb25 nissan skyline. And I have a problem but dont know what it is! I was out for a ride and pushed it a little bit and it worked perfekt the hole night. But suddenly it just worked on four cylinders. No 2 and 5 was not working. After a few days in the garage I managed to get it going perfekt again but dont really know what I did. Was out for a hole evening again and it worked perfekt. When the engine just running with no gear it started to work on only four cylinders again but this time on No 1 and 3 What can be wrong, any suggestion? Many Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted June 4, 2013 Report Share Posted June 4, 2013 I would be taking a close look at the igniter, Also check the main plug is done up fully and is seated tightly at both ends. I have seen cases where the plug in not fully connected at the ECU causing lots of problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.