brent ray Posted May 27, 2013 Report Share Posted May 27, 2013 Hey all, as the title says i got vl link g1 with 2.5 bar map sensor, im just wonding bout how to hook it up to the laptop for data. logging purposes, iv got the controller to tune it with,can't find any link to hook it to usb or what ever Quote Link to comment Share on other sites More sharing options...
Simon Posted May 28, 2013 Report Share Posted May 28, 2013 You will need a serial link to allow connection. It will also need to have PC compatible firmware, Firmware codes GTSq,r,s,t are all PC compatible. Anything other than these will need and upgrade. Quote Link to comment Share on other sites More sharing options...
brent ray Posted May 28, 2013 Author Report Share Posted May 28, 2013 Oh ok, the gts,q,s, same as the vl link rb30 Quote Link to comment Share on other sites More sharing options...
Simon Posted May 29, 2013 Report Share Posted May 29, 2013 Woops I missed that it was a VL you had. The fact its a VL ECU makes it mostly bad news in that it can not be connect to PC link. It can however connect to a small program called ComLink. This isn't up on the web so I will need to send it via email. If you email [email protected] we can get this to you. Quote Link to comment Share on other sites More sharing options...
brent ray Posted May 29, 2013 Author Report Share Posted May 29, 2013 Yeah ok ill do that, as the standard injectors are low inderpendance, can i rn gtr injectors that they are low aswel Quote Link to comment Share on other sites More sharing options...
Simon Posted May 30, 2013 Report Share Posted May 30, 2013 Yep that will be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.