Patrick Posted March 30, 2013 Report Share Posted March 30, 2013 My map limit is set to 280kpa and car boosts to 260kpa everything works perfectly fine. I have since tried setting the limiter down to 265 to keep a tighter tolerance and add more security. The car keeps cutting out well before it even approaches 260kpa, on a 5hz log the values show up as 228kpa > 242kpa > 253kpa > 236kpa > 181kpa > 51 kpa. I have also tried to set the check engine light to come on at 260kpa and it has not flashed even once even when the logs show small brief spikes over 260kpa. Cheers Pat Quote Link to comment Share on other sites More sharing options...
Jason Sutherland Posted March 30, 2013 Report Share Posted March 30, 2013 can you upload your .PCL file? Quote Link to comment Share on other sites More sharing options...
Levon Luther Posted March 31, 2013 Report Share Posted March 31, 2013 There could be other factors that change the MAP limit that you have setup but might not be aware of Perhaps you should plot the MAP Limit to see if it is dipping at all where you are getting the cutout. Things I can think of off the top of my head would be: ECT - IAT - Gear Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.