melvindass Posted August 28, 2014 Report Share Posted August 28, 2014 Hi, I noticed that the BAP figure for my Link G4 Plugin MKIV Supra is showing me a reading of 95.7kpa and an altitude reading of 540m. The place where I live is 10m above sea level. The help files says that the BAP sensor is calibrated from factory. Question is how do I get this BAP sensor to read the correct altitude? Appreciate the help. Thanks. Â Heres the ECU info : [1:14:37 PM] MainCode Firmware Version: 4.10.2BootCode Firmware Version: 1.4BAP Calibration: 56MAP Calibration: 1Support Board Revision: 0Main Board Revision: 1.2ECU Type: G4 Storm TopBoardECU Serial Number: 17247Authentication Number: 11LinkID: 8001ECUMinSpec: 4:101 Â Regards, Melvin Quote Link to comment Share on other sites More sharing options...
Simon Posted August 28, 2014 Report Share Posted August 28, 2014 The baro is going to change depend on weather conditions also. So getting a spot on altitude is rather hard. You will find if you are current in a low pressure weather system you will have low baro readings. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 1, 2014 Report Share Posted September 1, 2014 We will need to get the unit back to see what has happened with the baro sensor. If you go to http://www.linkecu.com/support/returns-policy This will take you through the returns process. Quote Link to comment Share on other sites More sharing options...
melvindass Posted September 1, 2014 Author Report Share Posted September 1, 2014 Thanks Simon, Will send the unit back. Regards, Melvin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.