Cnstman Posted February 28, 2015 Report Share Posted February 28, 2015 hello. I have a vipec pnp i88 board for my usdm 2004 subaru sti. I guess this unit would now be considered a link g4+. Has anyone tried the racepak 230-VM-EFILINK vnet Canbus cable and ran a IQ3 digital dash?  I have found some info on people using the racepak vipec v44/v88 cable over serial with mixed results. I figure this cable was designed for G4+ ecu with can onboard results may be better. Thanks. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 2, 2015 Report Share Posted March 2, 2015 Hi Aaron Yes can use the G4+ adapter with the i series vipec. This will allow CAN coms which will let you have dash connected while tuning. And if keen you could also customise the data stream. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 9, 2015 Report Share Posted April 9, 2015 Start with the generic dash or dash2 this covers most things people want to see. If you want additional then you will need to set up a custom stream. The Help file has information on doing this. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 9, 2015 Report Share Posted April 9, 2015 Start with the generic dash or dash2 this covers most things people want to see. If you want additional then you will need to set up a custom stream. The Help file has information on doing this. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 28, 2015 Report Share Posted May 28, 2015 Not in the out put but you should be able to change the dash to suit buy adding a multiplier to convert the signal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.