Robin Lind Posted April 24, 2015 Report Share Posted April 24, 2015 Hi. I have recently instald g4+ storm on my mazda renesis 6 port . And i have a rather odd problem . It looks like inteferenc butt it comes and goes  and gets wors when engien is hott . the TPS sensor is erratic and  the puls widh and duty cycle is to . I hav tried to shut off  the TPS butt still the same problem .  when i did a test drive today it started to go on 1 rotor then i died an did not start  reloded the base map then it started . now it runs wors then ever .  I heve attacht the base map  and  idle logg filemazda-10.pclrtomg-an-lite-trottel-p-a-mitten.llg Quote Link to comment Share on other sites More sharing options...
Simon Posted April 29, 2015 Report Share Posted April 29, 2015 In the log the TPS is moving enough to cause acceleration enrichment to activate. This will cause the mixtures to go really rich. I would be checking the grounds to the TPS and the actual TPS sensor. I suspect the plugs might have fouled which will be causing the bad running now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.