adding a torque steering and angle sensor to link G4+ Storm

[Josh McIntyre]

Hi Guys,

Am after some hints on how to add a torque sensor and potentially log this through the Link? Am i correct in thinking I am able to log basic sensors such as torque and steering wheel angle or is this not possible?

the sensor we are after is something such as these:

http://www.raetech.com/Instrumentation/Steering_Torque_Sensor.php

http://www.techmor.com/steering-wheel-torque-sensor-sw-1/

 

Both I believe have a 0-5V analog output so im guessing it could be possible...... but im really bad with electronics....

Any help would be awesome guys!!

Cheers,

Josh

[Simon]

If they use a 0-5V out you can connect to a AN volt input and log this input.

[Josh McIntyre]

Cheers Simon, any readings you can direct me to so I can understand this a bit better i.e. how to set up etc

[Simon]

The volt channel will need to be set to a GP input.

You can then log the raw voltage.