Jimmy Engdahl Posted January 26, 2013 Report Share Posted January 26, 2013 Hi. Im trying to get a evo 8 to start up. I did use the evo 5 base map, found out several I/O was wrong, now i found out the fuel pump isnt working. Is there any different from Evo 5 to Evo 8 in fuel settings on the pump? I also have 2 Oxygen sensors (front and rear) but it dosnt seams to work and map says its on pin 76 in the ecu. //Regards Quote Link to comment Share on other sites More sharing options...
Simon Posted January 28, 2013 Report Share Posted January 28, 2013 On some models the Fuel pump output and A/C clutch output are in opposite positions. Your base-map will need to be modified if this is the case. For the oxy sensors it will need to be set as a narrow band input. Also the fault settings will need to be set to 0V low as the sensor will read 0 volts at engine not running. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.