Andy Drummond Posted January 4, 2015 Report Share Posted January 4, 2015 Hi Link Am using latest firmware 5.3 on xtreme. The issue is when I start PCLink and go online. That is uploading. The Virtual Aux 2, third SW conditon 3 set point is zeroed (Timer2 > 40) That is the 40 value is changed to 0. Please note circling ecu power is ok, and with PCLink auto connect, no change.  Any questions do ask. Cheers Andy  Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Hi Andy, you state you are using ver 5.3 are you sure as this is dealer test firmware, which we are testing at present. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Andy Drummond Posted January 27, 2015 Author Report Share Posted January 27, 2015 Hi Link Team Just let you know I have been using G4+ on the race track for the last 3 weekends successfully. The above problem is still happening, it is NOT a show stopper. Please let me know that this small issue will be solved with next version release? Â Cheers Andy Quote Link to comment Share on other sites More sharing options...
Scott Posted January 27, 2015 Report Share Posted January 27, 2015 Hi Andy, Sorry we missed this earlier. I have been able to replicate the problem on the bench and we will now get onto fixing it. Thanks for bringing it to our attention. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.