Silly80 Posted July 30, 2012 Report Share Posted July 30, 2012 Hello Tech Support, I purchased a used G4 Storm silver case version. The label on the bottom of the case says PCB Rev 1.1, Serial #4779. I've actually installed the latest version of PC Link V4.9.3.1194 and did a firmware update using this latest version. Managed to connect via usb cable and did some testing of the outputs, but got some weird readings on some of them. Also, the MAP calibration function doesn't seem to work. What I'd like to know is which version of PC Link and firmware works best with this unit? Regards, ZK Han Quote Link to comment Share on other sites More sharing options...
Simon Posted July 30, 2012 Report Share Posted July 30, 2012 What you have is spot on. The latest is all ways the one to go for. Map cal will need to be done with correct sensor selected. Make sure its on 2.5bar The current base maps will set this to 4bar. Also check the reading of the baro sensor. Quote Link to comment Share on other sites More sharing options...
Simon Posted August 2, 2012 Report Share Posted August 2, 2012 For the MAP make sure you have the input set up on AN Volt 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.