mapper Posted March 17, 2015 Report Share Posted March 17, 2015 Hi I get a car in which has a Zeitronix ZT-2 controller with connected EGT and Wideband sensors. The Unit has a linear 0-5V output for Lambda, but no EGT ouput.  But all connected Sensor can be logged with a Laptop over a serial dataline. I found very little Info in the g4+ manual how to setting up serial data stream. Is it possible to setup the LINK G4+ to receive the serial data from the Zeitronix? Can the serial line be used while a CAN Dash and the laptop is connected over usb for tuning? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 18, 2015 Report Share Posted March 18, 2015 Hi No the ECU is not able to take serial data in. The serial and USB coms are purely for data our or PC link tuning. If serial is in use the USB is not able to be used at the same time.  Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.