Crispin Posted April 14, 2014 Report Share Posted April 14, 2014 I have a G4+ Xtreme with all 11 analog inputs wired in but the runtime dialog only shows the first 9. Also the 10th DI input is missing. Seems the layout of the runtime need an update. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 14, 2014 Report Share Posted April 14, 2014 On 5.0.3 which I have here it is displaying correctly. Do you have the latest PClink version? Quote Link to comment Share on other sites More sharing options...
Crispin Posted April 15, 2014 Author Report Share Posted April 15, 2014 That's odd. Yes I have the latest version. I will try to reload the layout and see if it changes. Quote Link to comment Share on other sites More sharing options...
Crispin Posted April 16, 2014 Author Report Share Posted April 16, 2014 I reloaded the layout and verified the latest version. No change, still looks like the screen dump in my first post. Maybe my older PCLink versions that are still installed (in other directories though) messes this up? But I still need to keep them as I'm tuning different boxes with this computer. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted April 16, 2014 Report Share Posted April 16, 2014 Hi, Every time there is a new  software/firmware release I create anew folder in my C drive and name it by the software version. Then during the install process I select that folder to save the installation to. This helps keep things a bit tidier and reduces the chances of corruption, I am NOT stating that this must be done, It is just how I have been doing it for years. On another note your layout you are using, the screen shot you have shown. Was it created with the new G4+  software or did you create it with the old G4 software and import it into your layouts folder in G4 + I have found sometimes when importing existing layouts  created with the older software into the new software layout folders, that the layout when opened has deviated from the saved layout.  I sometimes have to right click and reset the properties of the item with issues. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Crispin Posted April 19, 2014 Author Report Share Posted April 19, 2014 That's how I also manage the different versions - in separate folders named using the version, I removed all PC Link installs, deleted the folders, restarted and re-installed the G4+ version but still only 1-9 AUX channels shown in the Runtime dialog. Using the default layout and tried both my own map and the supplied xtreme sample map. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 22, 2014 Report Share Posted April 22, 2014 Have you tried while live with an ECU? Quote Link to comment Share on other sites More sharing options...
Crispin Posted April 25, 2014 Author Report Share Posted April 25, 2014 Yes. The engine is now started and running on the G4+ Xtreme. Still the same issue. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 28, 2014 Report Share Posted April 28, 2014 Can you get a couple of screen shots from the help menu. One of the ECU information and one of the About information. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.