Evan Stone Posted January 20, 2013 Report Share Posted January 20, 2013 Hi There Is there a base map for a 1uz non vvti using a g4 xtreme? The motor is running coil on plug setup and sequential injection. I have tried to use the 1uz vvti base map, changed the triggers to 1uz no vvti, turned off the vvti stuff. Checked the timing and offset to correct it, all seems ok. Have tried to start it but it wont start and get back fires every so often. So would seem the timing is way out? think im missing something basic Any suggestions would be great. Have attached the base map file. Thanks heaps1uzfe.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted January 21, 2013 Report Share Posted January 21, 2013 Most likely timing is out and you are firing on the exhaust stroke. You can either adjust the offset timing or swap the cam trigger on to the other cam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.