Limits Axis

[Llewellyn]

Would be really great to be able to be able to set the RPM limit by other factors than simply ECT.

Oil temperature for example would be great

[mapper]

you can use the two GP Limit tables for that. Only thing is, that two gp tables are sometimes to less. As example I use the follow setup on some cars: 

- RPM Limit vs ECT

- GP 1 minimum oil pressure dependant on rpm

- GP2 Differential FP pressure fail safe

I wish there where more GP limis, or some  kind of another safety feature setup page. In the setup above I would like to do additional an oil temp limit to protect the engine also if there is a  "stupid driver", which doesn't pay any attention to the engines behavier, behind the wheel. 

[Andy Drummond]

Hi

Option, On a gp limit table set y axis as aux (virtual) output and x axis as oil pressure.

Then setup output for three conditions as you like.

I have my output with if ect > 99 or oil low pressure light or oil temp > 115

remember on y axis output is 0 (faulty output), 1 = output off, 2= output on then limit revs relative to x axis (oil pressure).

This setup has saved my engine during high speed corner. Since it is logged i was able fix the problem very quickly.

hope u can understand,

Cheers  Andy