Wiring G4 on a Ca18det

[Javier Sanchez]

Hi,

I am wiring the LINK G4 Plug and Play ECU in a Nissan S13 (Ca18det engine), and as far I have seen, I have to modify some pinouts of the ECU, is it possible?

Also, I have a Intake Air temperature sensor, but I don't have instrucions to wire it, I have seen I have to wire it directly to the Link ecu, but i don't have the connector, do you sell it?

I purchase too the Link Display, but i don't have the cable to join with the ecu, do you sell it?

I need the CAN/RS232 for the link display

Thanks!

[Simon]

Hi

How do you mean modify the pinouts? You will need to configure the ECU to how you have wired it. This is done through PCLink ans selesting the correct functions for each input and output.

IAT sensor has ground to one pin and the other side goes to a AN temp input on the ECU.

We can supply connector through your local dealer along with the display cable.

[Javier Sanchez]

So sorry, the correct one is can you tell me*

[Simon]

Hi

Both questions are covered really well in the PC link Help file. This is a huge resource and the search function is very good.