matt henderson Posted June 2, 2009 Report Posted June 2, 2009 hi trying to find info i think i have a v1 link is in a 4age20v off roader ecu has had water in had been dried out i fitted it it fired and ran rough then stalled and fried a track in the circut board on ign1 circut hav inspected the wireing and seems to be ok has had no modifications since last running 12 months ago can you change the removable chip into a new ecm as this has been well dynoed by previous owner and want to avoid going through that again. Quote
Simon Posted June 9, 2009 Report Posted June 9, 2009 If you get the ECU back to us we will be able to retain the numbers and repair the damage to the board. If the damage is beyond repair then we will advise the best path to take. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.