Incognito G Posted January 5, 2013 Report Posted January 5, 2013 Hi Everyone, I need help. I have a mitsubishi evolution 6 and it won't start. I have trigger 1 set as rising and trigger 2 set as falling. Trigger 1 is the CAS and Trigger 2 is the CAM. When starting the car, I get only 200 rpm, the Trigger tab of Runtime Values show no error. I have fuel and sparking going into the engine. Trigger type is set as Mitsubishi Evoluition 1-6. Anybody who can help me get started on what to check? Compression is good on all cylinders. Appreciate the help. Regards, IGX Quote
Simon Posted January 9, 2013 Report Posted January 9, 2013 Check the ignition timing. If you have spark and fuel and compression it can only really be the spark is at the wrong time. Quote
Simon Posted January 9, 2013 Report Posted January 9, 2013 I am assuming the ignition is stock EVO Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.