Javier Sanchez Posted April 8, 2013 Report Share Posted April 8, 2013 Hi,Can you tell me what sensor type is this IAT sensor on the ECU? Also I've an AEM UEGO widebando with bosch lambda, It has wired to AN Volt 1, but what calibration have i to choose? Thanks Quote Link to comment Share on other sites More sharing options...
Scott Posted April 8, 2013 Report Share Posted April 8, 2013 Hi Javier, That looks like one of the sensors that uses a 'Delphi AC IAT' Calibration. There is no pre-configured calibration for this wideband unit. You will need to enter the information from the AEM Data sheet into a calibration table and select that table as your calibration. See PCLink Help > G4 ECU Tuning Functions > Analog Inputs > Custom Sensor Calibrations for more information. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Scott Posted April 10, 2013 Report Share Posted April 10, 2013 Hi Javier, If you look in PCLink > ECU Settings > Analog Inputs the custom cal tables are underneath the AN Volt channels. For your wideband unit the input units will be volts and the output units will be AFR. Most wideband sensor signals are linear, so I would recommend using calibration table 4, 5, or 6. If you can get the data, enter Input Value A at 0.5 volts and Input Value B at 4.5 volts. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.