priming a gp output

[Josh T]

Im running a solid state relay  controlling my fuel pump which is controlled by a Gp pwm aux output map vs rpm pwm table. Iam trying to set it up so it does a 3 second prime when keyed on,  I run a 450lph pump with a std fuel reg do a simple crossover using yhe fp speed control wont work. Iv had a play around but no luck.

[Simon]

On your GP PWM out put you have the option of setting conditions.

You could make it dependent on an AUX out set as fuel pump.

[Josh T]

Ok just got back from work and had a play. Got it working as you said but using a virtual aux output set as fuel pump.  Thanks for your help.