Jump to content

G4+ Xtreme + Link Display


Recommended Posts


where i have to connect the LinkDisplay with the G4+ Xtreme over Can or USB? And which ECU i should take inside the LinkDisplay `? must i do some Configurtion on the ECU that the Display will work?


Thanks for Help

Link to comment
Share on other sites

You will need to connect to the CAN/RS232 port.

The Dash will need to be set to the correct ECU type, the best would be linkuCAN

The ECU will then need the CAN configured this is covered in the Help file of PCLink.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...