johan nilsson Posted July 3, 2013 Report Share Posted July 3, 2013 Hi. I have a Link LEMV5 on my toyota mr2t-91. And I have a problem with clostloop and set static timing. If I turn clostloop on and the Engine is runing rich, the clostloop function just make it richer not leaner. And if I put in the original ecu it runs att 14,7:1 nicely. So what can be the problem? And I cant find the funktion to turn on set static timing. Where in the pc-program is it? Regards Johan Quote Link to comment Share on other sites More sharing options...
Simon Posted July 4, 2013 Report Share Posted July 4, 2013 In PC link to set static timing you need to set the Advance limit to 0 and then check with timing light. Most likely your target voltage is set incorrectly so it is targeting a rich value. But really the closed loop on the G1's is not the best as it relies on a narrowband signal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.