Warwick Knox Posted January 10, 2013 Report Share Posted January 10, 2013 Hi Guys Im in the process of build my project car its an old mitsubishi and im fitting a 4g63t rvr engine to it the same as evo 2 0r 3 so im told. I have the engine and factory loom for it as well as the ecu but i have also just purchased an unused link plus that came with what looks to be an early vr4 (sub board i think its called) that the factory loom would plug into but hasnt been installed. my question is do you think im better off get the sub board changed to suit the rvr loom or should i just do a complete engine rewire and use the link loom as its not being used in a rvr Cheers for the advice in advance Quote Link to comment Share on other sites More sharing options...
Simon Posted January 15, 2013 Report Share Posted January 15, 2013 Assuming what you have is a LinkPlus with an adapter board to VR4 (an adapter has a short loom that converts the linkplus to a factory header) If this is the case there is no adapter available to suit the RVR so you could either wire the unit in or convert the car to a VR4 loom. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.