Paora Smith Posted December 2, 2013 Report Posted December 2, 2013 Hi guys I have a G4 in a car that I didnt tune it was tuned and running before I got it. On plugging the usb in my laptop and switching the link on before connecting I have 3 errors that keep coming up. MemLoc=280, MemLoc=281 and MemLoc=10386. I Cycles through these errors not allowing me to connect. What do I need to do to stop these errors or what is causing them? The engine runs and drives and I want to run the pc link to assign a tacho drive to a output. Any help would be great thanks! Quote
Simon Posted December 2, 2013 Report Posted December 2, 2013 Chances are that it is running much older firmware than your PC tuning software. Given you are not wanting to check the tune as such you will be best to download an older version of PC link G4 and try connecting with it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.