Jump to content

No RPM registering on link

Mike Graham

Recommended Posts

I have a issue that we can,t get the link to register the cam angle, ie there's no RPM when you are cranking over.  I have tesed to make sure that there is a trigger at the computer plug and it does.  It's not the Distributor as we tried it in a car with a factory ECU and all went fine.


Any Ideas?

Link to comment
Share on other sites

Assuming this is a G1 unit has it been configured to suit the application? The G1 units require the correct sub-board to be fitted to match the application.

What engine is this being run on?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...