JohnRambo Posted August 6, 2015 Report Share Posted August 6, 2015 HiI've just got a G4 plug in to replace my G1 plugin for an RB. Looking in the install manual it has aux 5 as a pin function, but on the pinout for the rb there is no Aux5. Does it exist at all on the RB connector?The other question I have is I had launch control on the G1 and it used pin 44 for the RB, but on the pinout for the G4 it isn't listed.Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Simon Posted August 6, 2015 Report Share Posted August 6, 2015 (edited) Aux 5 is not used.Pin 44 is connected to Di8 on the G4+ range on the latest bottom board.If you have the G4 not the + series this pin will not be connected. You will have a couple of Di's available on the XS loom that could be used for launch control. Edited August 6, 2015 by Simon Quote Link to comment Share on other sites More sharing options...
JohnRambo Posted August 6, 2015 Author Report Share Posted August 6, 2015 (edited) Thanks for the quick response. I don't have A/C in my car, so I was thinking of poaching the DI4 used for A/C in for Launch.It's a G4 and not a G4+ Edited August 6, 2015 by JohnRambo Quote Link to comment Share on other sites More sharing options...
Simon Posted August 6, 2015 Report Share Posted August 6, 2015 That would be ideal to use the AC request given you don't have AC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.